صفحه نمایش LCD راه بسیار خوبی برای نمایش خروجی آردوینو در زمانی که به کامپیوتر شما متصل نیست است.
صفحه نمایش رایج مورد استفاده در پروژه های آردوینو، نمایشگر LCD موازی 16×2 است که با درایور هیتاچی HD44780 سازگار است. این رابط 16 پین را به راحتی تشخیص می دهد.
این طرح پیام متنی "سلام، دنیا" و زمان را در ثانیه از آخرین تنظیم مجدد چاپ می کند.
دستورالعمل؛
1) تمام سیم جامپر را همانطور که در نمودار نشان داده شده است وصل کنید.
2) پتانسیومتر 10 کیلو اهم را روی تخته نان وصل کنید. از این پتانسیومتر برای تنظیم کنتراست کاراکتر LCD استفاده می شود.
3) صفحه نمایش LCD را روی تخته نان وصل کنید.
این کد را در آردوینو خود آپلود کنید
/* LiquidCrystal Library - Hello World Demonstrates the use a 16x2 LCD display. The LiquidCrystal library works with all LCD displays that are compatible with the Hitachi HD44780 driver. There are many of them out there, and you can usually tell them by the 16-pin interface. This sketch prints "Hello World!" to the LCD and shows the time. The circuit: * LCD RS pin to digital pin 7 * LCD Enable pin to digital pin 8 * LCD D4 pin to digital pin 9 * LCD D5 pin to digital pin 10 * LCD D6 pin to digital pin 11 * LCD D7 pin to digital pin 12 * LCD R/W pin to ground * 10K resistor: * ends to +5V and ground * wiper to LCD VO pin (pin 3) Library originally added 18 Apr 2008 by David A. Mellis library modified 5 Jul 2009 by Limor Fried (http://www.ladyada.net) example added 9 Jul 2009 by Tom Igoe modified 22 Nov 2010 by Tom Igoe This example code is in the public domain. http://www.arduino.cc/en/Tutorial/LiquidCrystal Code hosted at: arduinoprojects101.com */ // include the library code: #include <LiquidCrystal.h> // initialize the library with the numbers of the interface pins LiquidCrystal lcd(7, 8, 9, 10, 11, 12); void setup() { // set up the LCD's number of columns and rows: lcd.begin(16, 2); // Print a message to the LCD. lcd.print("hello, world!"); } void loop() { // set the cursor to column 0, line 1 // (note: line 1 is the second row, since counting begins with 0): lcd.setCursor(0, 1); // print the number of seconds since reset: lcd.print(millis()/1000); }
1) صفحه نمایش ال سی دی موازی 1×16×2 (سازگار با درایور هیتاچی HD44780)
2) آردوینو 1×
3) پتانسیومتر 1×10 کیلو اهم
4) سیم جامپر
برای جزئیات بیشتر: اتصال کد صفحه نمایش LCD آردوینو
در ادامه، متن انگلیسی این مطلب را میتوانید مشاهده نمایید:
LCD display is great way to display output from your arduino when it not connected to your computer.