هر زمان که برای چند روز به خارج از شهر می رویم، همیشه نگران گیاهان خود بودیم زیرا به طور منظم به آب نیاز دارند. بنابراین در اینجا ما در حال ساخت سیستم آبیاری خودکار گیاهان با استفاده از آردوینو هستیم که به طور خودکار آب را در اختیار گیاهان شما قرار می دهد و با ارسال پیام به تلفن همراه شما را به روز می کند.
در این سیستم آبیاری گیاه ، سنسور رطوبت خاک سطح رطوبت خاک را بررسی می کند و اگر سطح رطوبت کم باشد، آردوینو پمپ آب را روشن می کند تا آب مورد نیاز گیاه را تامین کند. هنگامی که سیستم رطوبت کافی در خاک پیدا کند، پمپ آب به طور خودکار خاموش می شود. هر زمان که سیستم پمپ را روشن یا خاموش می کند، پیامی از طریق ماژول GSM برای کاربر ارسال می شود که وضعیت پمپ آب و رطوبت خاک را به روز می کند. این سیستم در مزارع، باغ ها، منازل و غیره بسیار کاربردی است. این سیستم کاملاً خودکار است و نیازی به دخالت انسانی نیست.
قطعات مورد نیاز:
- آردوینو اونو
- ماژول GSM
- ترانزیستور BC547 (2)
- سیم های اتصال
- LCD 16×2 (اختیاری)
- منبع تغذیه 12 ولت 1 آمپر
- رله 12 ولت
- پمپ کولر آبی
- سنسور رطوبت خاک
- مقاومت (1k، 10k)
- مقاومت متغیر (10k، 100k)
- کانکتور ترمینال
- آی سی رگولاتور ولتاژ LM317
ماژول GSM:
در اینجا ما از ماژول TTL SIM800 GSM استفاده کرده ایم. SIM800 یک ماژول کامل چهار بانده GSM/GPRS است که می تواند به راحتی توسط مشتری یا علاقه مند جاسازی شود. ماژول GSM SIM900 یک رابط استاندارد صنعتی را ارائه می دهد. SIM800 عملکرد GSM/GPRS 850/900/1800/1900MHz را برای صدا، پیام کوتاه، داده با مصرف انرژی کم ارائه می دهد. طراحی این ماژول GSM SIM800 باریک و جمع و جور است. به راحتی در بازار یا به صورت آنلاین از eBay در دسترس است.
بیشتر بخوانید: سیستم آبیاری خودکار گیاهان مبتنی بر آردوینو با هشدار پیام
در ادامه، متن انگلیسی این مطلب را میتوانید مشاهده نمایید:
Whenever we go out of town for few days, we always used to worry about our plants as they need water on regular basis. So here we are making Automatic Plant Irrigation System using Arduino, which automatically provides water to your plants and keep you updated by sending message to your cell phone.
In This Plant Watering System, Soil Moisture Sensor checks the moisture level in the soil and if moisture level is low then Arduino switches On a water pump to provide water to the plant. Water pump gets automatically off when system finds enough moisture in the soil. Whenever system switched On or off the pump, a message is sent to the user via GSM module, updating the status of water pump and soil moisture. This system is very useful in Farms, gardens, home etc. This system is completely automated and there is no need for any human intervention.
Required Components:
- Arduino Uno
- GSM Module
- Transistor BC547 (2)
- Connecting wires
- 16×2 LCD (optional)
- Power supply 12v 1A
- Relay 12v
- Water cooler pump
- Soil Moisture Sensor
- Resistors (1k, 10k)
- Variable Resister (10k, 100k)
- Terminal connector
- Voltage Regulator IC LM317
GSM Module:
Here we have used TTL SIM800 GSM module. The SIM800 is a complete Quad-band GSM/GPRS Module which can be embedded easily by customer or hobbyist. SIM900 GSM Module provides an industry-standard interface; the SIM800 delivers GSM/GPRS 850/900/1800/1900MHz performance for voice, SMS, Data with low power consumption. The design of this SIM800 GSM Module is slim and compact. It is easily available in the market or online from eBay.
Read More: Arduino based Automatic Plant Irrigation System with Message Alert