من روی پروژهای کار میکردم که از یک نمایشگر LCD 2×16 استفاده میکرد و میخواست یک روکش زیبا داشته باشم که به من اجازه دهد در برابر آب و سایر مایعات ببندم. همچنین به مقاومت در برابر ضربه، هزینه کم و قابلیت تعویض به راحتی در صورت ساییدگی یا شکستگی نیاز داشتم.
من ایده های مختلفی را در نظر گرفتم: -
1) یک صفحه کامل پرسپکس در جلوی محفظه ام. پرداخت عالی اما گران است و آب بندی آن به عنوان کاملا شفاف دشوار است.
2) یک قطعه کوچک پرسپکس روی یک سوراخ بریده شده در محفظه. پرداخت ارزانتر اما نه چندان زیبا، نمایشگر LCD کامل و هر برش محفظه خشن.
3) به دنبال دسترسی به یک برش لیزری برای ساختن یک پنجره perspex پروفیلی که از طریق سوراخ محفظه قرار می گیرد تا همسطح با سطح قرار گیرد. تحمل های دشوار و عدم کنترل عمق با لیزر.
4) درخواست از یک کارگاه محلی برای ساخت پنجره پرسپکس پروفیلی در ماشین های فرز CNC. هزینه بیشتر از استفاده از یک صفحه پرسپکس کامل.
بنابراین، در نهایت چیز دیگری را امتحان کردم و به آنچه فکر میکنم یک روکش حرفهای خوب است که انجام آن آسان، ارزان است و منجر به یک قاب شیشهای مشکی نوع آیفون میشود، با یک پنجره شفاف دقیقاً اندازه مناسب برای نمایش نمایشگر. به درستی. همچنین می توان آن را به راحتی با هر نوع یا اندازه نمایشگر دیگری تطبیق داد.
مرحله 1: ایجاد و چاپ یک الگو
اولین قدم این بود که نمایشگر موجود را برداریم و آن را به نوعی ترسیم CAD منتقل کنیم تا بتوان یک الگو درست کرد.
از آنجایی که من با CADSoft Eagle مهارت بیشتری پیدا کردم، به سادگی از یک فایل BRD خالی با شبکه میلی متری برای ایجاد طراحی و چاپ در مقیاس بر روی کارت استفاده کردم.
می توانید از هر بسته ای استفاده کنید که به شما امکان می دهد نقشه های دقیق در مقیاس 1:1 ایجاد کنید. شما باید آن را برای چاپ در مقیاس درست انجام دهید.
ابعاد اصلی نمایشگر LCD 16×2 را که داشتم، گرفتم و آن را ترسیم کردم، از جمله سوراخ های ایستاده. سپس یک ساندور 5 میلیمتری اضافی اضافه کردم تا به قاب من استحکام بیشتری در اطراف سوراخهای ثابت ببخشم، و همچنین بهتر به نظر برسد زیرا سوراخها درست روی لبه نیستند.
قالب را چاپ کنید و سپس از یک چاقوی تیز (چاقوی کاردستی، چاقوی پیرایش، چاقوی جراحی) یا قیچی برای برش طرح و حاشیه داخلی استفاده کنید.
من برای این کار از کارت ساده استفاده کردم، اما اگر قصد دارید تعداد زیادی از اینها بسازید، کمی زمان اضافی برای ساختن یک قالب پلاستیکی/اکریلیک بهتر است.
![](https://www.instructables.com/static/defaultIMG/file/PDF.gif)
قالب قاب LCD 16×2.pdf 5 کیلوبایت
![](https://www.instructables.com/static/defaultIMG/file/PDF.gif)
قالب 128×64 1.8 اینچی TFT Bezel.pdf 4 KB
مرحله 2: از الگو برای علامت گذاری بر روی یک قطعه Perspex استفاده کنید
سپس از الگوی برش استفاده کنید تا یک تکه اکریلیک / پرسپکس شفاف را با بعد بیرونی علامت بزنید و سپس آن را برش دهید.
برای جزئیات بیشتر: قاب / پنجره خانگی برای نمایشگرهای LCD، LED، TFT.
در ادامه، متن انگلیسی این مطلب را میتوانید مشاهده نمایید:
I’ve been working on a project that used a 16×2 LCD display and wanted a nice finish that also allowed me to seal against water and other liquids. I also needed impact resistance, low cost and the ability to be changed easily if worn or broken.
I considered many different ideas:-
1) A full sheet of perspex on the front of my enclosure. Great finish but expensive and difficult to seal as fully transparent.
2) A small piece of perspex over a cut hole in the enclosure. Cheaper but not so nice finish, showing the full LCD through and any rough enclosure cutting.
3) Looking for access to a laser cutter to make a profiled perspex window that sits through the enclosure hole to sit flush with surface. Difficult tolerances and no depth control with a laser.
4) Asking a local workshop to make a profiled perspex window on CNC milling machines. Cost more than using a full perspex sheet.
So, eventually I tried something else and ended up with what I think is a nice professional finish that is easy to do, cheap, and results in an iPhone type black glass frame style, with a clear window exactly the right size to show the display properly. It can also be easily adapted to any other type or size of display.
Step 1: Create And Print A Template
The first step was to take the existing display and get this transferred to some kind of CAD drawing, so that a template can be made.
Since I’ve been getting more proficient with CADSoft Eagle, I simply used a blank BRD file with mm grid to create my drawing and print at scale on to some card.
You could use any package that allows you to create accurate drawings at a 1:1 scale. You need it to come out in print to the correct scale.
I took the original dimensions of the 16×2 LCD display I had and drew it up, including the stand-off holes. I then added an additional 5mm surround to give my bezel additional strength around the fixing holes, and also to make it look better since the holes wouldn’t be right on the edge.
Print the template off and then use a sharp knife (craft knife, trimming knife, scalpel), or scissors, to cut out the outline and the inside border.
I used plain card for this, but a bit of extra time to make a plastic/acrylic template might be better if you intend to make a lot of these.
![](https://www.instructables.com/static/defaultIMG/file/PDF.gif)
16×2 LCD Bezel Template.pdf5 KB
![](https://www.instructables.com/static/defaultIMG/file/PDF.gif)
128×64 1.8in TFT Bezel Template.pdf4 KB
Step 2: Use Template To Mark Out On A Piece of Perspex
Next use the cut out template to mark up a piece of clear acrylic / perspex with the outside dimension and then cut this out.